Sveon SNT1022 Manual De Usuario página 24

6. If you want to modify the previously selected options,
press "Back". If not, press "Install" to install all the selec-
ted options.
Note: This last step doesnçt appear under Windows Vista
or W7
7. Once the installation finishes, click on "Finish".
8. Device connection
1. Connect the device or the USB stand to an available USB port of your computer. It will be recognized and installed by
the Windows installation wizard automatically.
2. Access to the device through "Start" menu > "Ralink Wireless Utility" or through this icon
located in the Windows bar.
- Windows XP operating system
- Windows Vista operating system
- W7 operating system
The icon colour changes depending on the device status:
When the icon is blue, means that it is not connected to a network.
When the icon is green, means that it is connected with good signal coverage.
When the icon is yellow, means that it is connected with normal signal coverage.
When the icon is red, means that it is connected with bad signal coverage.
When the icon is black, means that there isn´t any network device detected.
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
24
English