Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Welcome
Thanks for choosing SNT1022, a WiFi dual band 2,4/5Ghz USB 11n adapter from Sveon to connect your laptop or com-
puter through a network in a wireless mode. This adapter includes two RP-SMA female antennas which you can move or
replace to get a better coverage.
Through this user guide we will show you how to connect and use the device to get the best performance.
2. Features
SNT1022 from Sveon will allow you to get the maximum performance of your WiFi network thanks to its high speed trans-
fer rate up to 300Mbps and its Dual Band which will allow you to connect to WiFi networks working on 2,4Ghz besides 5Ghz
frequencies. Connect your PC or laptop in a very fast and easy way, thanks to Ralink advanced software and thanks to
WPA2 security. The device supports the data encryptation WEP/64/128, WPA and WPA2.
WiFi technology uses two bands of frequency: 2,4Ghz already working with 802.11b, 802.11g and 802.11n protocols and
5Ghz for 802.11a and 802.11n protocols. SNT1022 can receive wireless 11n signals in both 2,4Ghz and 5Ghz. 5Ghz band
has a wider number of available channels and there are less devices working on it so you will get a clearer connection with
less interferences with other WiFi networks and devices.
* You need to have a modem router working on 5Ghz band frequency.
3. System requirements
- PC or laptop with an available USB 2.0 port*
- OS: XP with Service Pack 2, 2000, Vista, W7, Linux, Mac (10.6)
- CD/DVD ROM unit
- Processor 300MHZ with 64mb of RAM.
- Wireless Modem/Router 802.11b/g o 802.11n
- Wireless Modem/Router working on 5Ghz if want to connect to 5Ghz band frequency.
* If you use an USB 1.1 connection the speed and signal level may be reduced.
4. Technical Specifications
- Modulation Type: OFDM/CCK/16-QAM/64-QAM
- Standard: IEEE 802.11n, 802.11g, IEEE802.11b, IEEE802.11a
- Interface: USB 2.0
- Frequency: 2.4 ~ 2.4835
- Spread Spectrum: DSSS
- Transmission distance: 100m (indoor), 300m (outdoor, it depends on the usage environment)
- Data Rate:
11n: 300 / 150 /108 / 81 / 54 / 27 Mbps
11b: 1, 2, 5.5, 11 Mbps
11g: 6, 9, 12, 24, 36, 48, 54 Mbps
- Transmit power:
2,4Ghz: 11n: 15dbm / 11g: 15dbm / 11b: 18dbm
5Ghz: 11a: 14 dbm / 11n: 13dbm
- Data secourity: 64,128, 152 WEP, WPA/WPA2, WPA-PSK/WPA2-PSK (TKIP/AES)
- Indicator LED
- Receiver sensitivity:
-135M/270M/300M: -65dbm@10%
- 54M/108M: - 68 dBm@10%
-11M: - 85 dBm@10%
- 6M: - 88 dBm@10%
-1M: - 90 dBm@8%
- Environment:
· Operating Temperature: 0ºC~40ºC
· Storage Temperature: -40ºC ~ 70ºC
· Relative Humidity: 10% ~ 90% (non-condensing)
· Storage Humidity: 5% ~ 95% (non-condensing)
5. Content
- SNT1022 adaptor with RP-SMA connector (female connector / Male pin).
- Double 2dBi omnidirectional antennas with RP-SMA connector
- CD Driver
- Digital user guide (included in CD Driver)
- Guarantee card
- Quick Installation Guide
6. Hardware
1. SNT1020 adaptor
2. USB port
3. Double RP-SMA antenna
4 Status indicator LED
5. RP-SMA antenna connector
SNT1022 User Manual
Index
1. Welcome
2. Features
3. System requirements
4. Technical specifications
5. Content
6. Hardware
7. Driver installation on PC
8. Device connection
8.1 RaUI setup
9. Network connection
9.1 Network connection using WZC
9.2 Network connection using RaUI utility
9.3 Network connection in AP-Mode (Ad Hoc)
9.4 Network connection in 5Ghz frequency
10. RaUI software control panel
10.1 Network
10.2 Profile
10.3 Advance
10.4 Statistics
10.5 WMM
10.6 SSO
10.7 CCX
10.8 Radio On/Off
10.9 About
11. MAC address specifications
Important information
22
English
Tabla de contenido
