Technical Data - Beper 90.351N Manual De Instrucciones

Electric Kettle Use instructions
Acid citric:
Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.
Empty the kettle and rinse it 5 or 6 times.
Repeat if necessary.
Do not use other methods or detergents to remove lime scale.
In case of :
Use while empty
The kettle is on but without water in or the tartar activates the safety system and block the unit:
let the kettle cool down and fill it with water. Use the switch to turn it on: the kettle start again after
approx. 15 minutes.
Water smell as "new"
It happens when the appliance is new. When used to the first time throw water several times. If the
problem remains, fill the kettle to MAX. level, and add 2 spoons of bicarbonate.
Make it boiled, throw water and rinse the unit.

TECHNICAL DATA

Power: 1850 - 2000W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out "wheeled bin" symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
10