Field Of View - Urrea UD80 Manual De Usuario Y Garantía

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

E S P A Ñ O L
• Adjustable emissivity for more accuracy on all surfaces.
• Highest alarm temperature setting.
• Lowest alarm temperature setting. (*The parameters are adjusted
by using
4.5 Remarks
• If you want to know more details of our tender considerations for
users on the operations, please read the following contents.
• No matter you push the measuring trigger or not, when the unit's
power is on, you can change the functions or adjust the parameters.
• To avoid dummy operations, the setup of functions can be
performed, only after the unit wakes up by the measuring trigger
to make sure the correct operations.
• To avoid careless touch, some power management designs have to
be implemented.
• Auto function allows you continuously measure the target
temperature and you don't have to keep pulling the measuring
trigger all the time.
• Auto function can be only setup when both the measuring trigger
and the F function button are pressed at the same time.
• The unit is totally power off, no more standby current when storage,
to keep battery last much longer.
5. TECHINIQUES OF INFRARED
THERMOMETER

5.1 Field of view

(FOV) ratio=distance to diameter (DS) ratio.
The field of view is the angle of vision at which the instrument operates,
and is determined by the optics of the unit. The FOV is the ratio of the
distance from the target to the target diameter. The smaller the target,
the closer you should be to it. When the target diameters is small, it is
important to bring the thermometer closer to the target to insure that
only the target is measured, excluding the surroundigs.
12
or
buttons).

Hide quick links:

Tabla de contenido
loading

Tabla de contenido