Stihl MS 171 Manual De Instrucciones página 60

English
Observe the information about ANSI
standard B 175.1-2000 as well as the
definition "low-kickback saw chain" in
the section "Safety Precautions and
Working Techniques".
Rollomatic E guide bars
STIHL reduced kickback guide bars
(with green label)
Bar lengths: 12, 14, 16 in.
(30, 35, 40 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.043 in. (1.1 mm)
Sprocket nose: 7-tooth
Saw chains 3/8" P
STIHL reduced kickback saw chain
(with green label)
Picco Micro Mini Comfort 3
(61 PMMC3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.043 in. (1.1 mm)
Chain sprocket
Spur chain sprocket or rim sprocket
6-tooth for 3/8" P
Bar and chain MS 211, MS 211 C
Recommended cutting attachments in
compliance with Sec. 5.11 of ANSI
standard B 175.1-2000
Observe the information about ANSI
standard B 175.1-2000 as well as the
definition "low-kickback saw chain" in
the section "Safety Precautions and
Working Techniques".
58
Rollomatic E Light guide bars
STIHL reduced kickback guide bars
(with green label)
Bar lengths: 14 in. (35 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.050 in. (1.3 mm)
Sprocket nose: 9-tooth
Rollomatic E guide bars
STIHL reduced kickback guide bars
(with green label)
Bar lengths: 12, 14, 16 in.
(30, 35, 40 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.050 in. (1.3 mm)
Sprocket nose: 9-tooth
Saw chains 3/8" P
STIHL reduced kickback saw chain
(with green label)
Picco Micro Comfort 3 (63 PMC3)
Picco Super 3 (63 PS3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.050 in. (1.3 mm)
Chain sprocket
Spur chain sprocket or rim sprocket
6-tooth for 3/8" P
7-tooth for 3/8" P
Cutting attachment MS 171, MS 181,
MS 181 C, MS 211, MS 211 C
In order to comply with the kickback
performance requirements of Sec. 5.11
of ANSI standard B 175.1-2000, do not
use replacement saw chains unless they
have been designated as meeting the
ANSI Sec. 5.11 requirements on this
specific powerhead, or have been
designated as "low kickback" saw
chains in accordance with the ANSI B
175.1-2000 standard.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
MS 171, MS 181, MS 181 C, MS 211, MS 211 C