Knowyourpressure Washer - Craftsman 580.752840 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

KNOWYOURPRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments.
Save this manual for future reference.
A - Spray Gun -- Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
B - High PressureHose-- Connect one end of hose to pump and
the other end to spray gun.
C - SprayTips -- Detergent, 0°, 15°, 25° and 40°: for various high
pressure cleaning applications.
D - Project Pro@ PerfectMWM Siphon -- Mixes concentrate with
pressure washer spray.
E - PressureControl Knob-- Varies pressure of high pressure
spray.
F - Bottle Bracket -- Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
G - High Pressure Outlet -- Connection for high pressure hose.
H - Pump -- Develops high pressure.
J - Automatic Cool DownSystem -- Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge
from pump onto ground. This system prevents internalpump
damage.
K - Choke Lever-
Used when starting a cold engine.
L - Air Filter -- Protects engine by filtering dust and debris out of
intake air.
IVi- Recoil Starter -- Usedfor starting the engine manually.
N - Fuel Valve -- Used to turn fuel supply on and off to engine.
P - Throttle Lever -- Sets engine in starting mode for recoil starter
and stops a running engine.
R - Nozzle Extensionwith QuickConnect -- Allows you to switch
betweenfive different spray tips.
S - Fuel Tank -- Filltank with regular unleaded fuel. Always leave
room for fuel expansion.
items Not Shown:
Detergent Siphoning Tube/Filter -- Useto siphon pressure washer
safe detergents into the low pressure stream.
Engine Identification -- Provides model, type and code of engine.
Pleasehave these readily available if calling for assistance.
identification Label (near rear of base plate) -- Provides model
and serial number of pressure washer. Pleasehave these readily
available if calling for assistance.
Oil Drain-- Drain engine oil here.
Oil Fill -- Check and add engine oil here.
Warning/Operating Instructions Tag-- Identifieshazardsand
proper procedure to start/stop pressure washer.
Water Inlet -- Connection for garden hose.
Tabla de contenido
loading

Tabla de contenido