Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PIR motion sensor PNI SafeHouse HS003LR
Technical specifications
•
Power supply: 4.5VDC (3 AA batteries, 1.5V)
•
Standby current: ≤15µA
•
Alarm current: ≤25mA
•
Detection distance: up to 12 m
•
Detection angle: 110 °
•
WiFi transmission distance: up to 80 m
(in the open field)
•
Frequency: 433MHz
•
Transmission power: 10mW
•
Operating temperature: -10°C ~ +50°C
Functions
Sensitivity setting (via PULSE1 and PULSE2 jumpers)
PULSE2
PULSE1
PULSE2
PULSE1
PULSE2
PULSE1
Operation mode setting (via TEST and NORMAL jumpers)
In the normal operating state, if within 3 minutes the sensor detects motion twice, it enters the battery saving mode. In
this state, motion detection does not generate an alarm. If no movement is detected in the next 3 minutes, the sensor
returns to normal operation mode.
TEST
NORMAL
TEST
NORMAL
Pairing the sensor
with the alarm system
Press the pairing button on
the back of the sensor to
send a signal to the central
unit.
High sensitivity to movement
Medium sensitivity to movement
Low sensitivity to movement
Test mode
Normal mode
3 - User manual
LED indicator
•
Flashes for 30 seconds after the sensor is turned
on.
•
Lights up when the sensor detects movement.
•
Flashes in case of low battery.
ON/OFF
Turn the sensor on/off
Pull the side button up to
turn on the sensor.
Setting the jumpers
OPEN
CLOSE
Tabla de contenido
