Teka DSB ISLA Manual De Instrucciones página 11

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
• Do not produce flames under the
hood.
• The bottom of the hood must be
fitted at least 65cm above gas
or combination hobs. Observe the
minimum limits set by WORKTOP
MANUFACTURER'S
LIMITS. This distance may be
reduced if mentioned in the hood
installation instructions.
• Never leave gas burning without a pan above
it. The grease accumulated in the filters may
drip or catch fire when the temperature is
increased.
• Avoid cooking under the hood if the metal
filters are not fitted e.g. while they are being
cleaned in the dishwasher.
• We recommend you wear gloves and use
extra caution when cleaning the inside of the
hood.
• Your hood is designed for domestic use
and only for the extraction and purification
of gases from food preparation. Use for
other purposes is at your own risk and
may be dangerous. The manufacturer is not
responsible for damage caused by improper
use of the device.
• For repairs please contact the manufacturer's
nearest Technical Assistance Department
which will always use genuine parts. Repairs
or modifications by unauthorized personnel
may result in damage to equipment or
malfunction, endangering safety.
• This device complies with the European
Directive 2002/96/EC on electrical and
electronic devices entitled "Electrical
and Electronic Equipment Waste ". The
directive provides the framework applicable
throughout the European Union for the return
and recycling of electrical and electronic
equipment waste [symbol] responsible for
his/her safety. Keep children away from the
device and never let them play with it
•You can activate or deactivate the cooker
MINIMUM
•Switch on the extractor fan a few minutes
•Allow the extractor fan to run for several
1) Switch on the cooker hood and choose the
2) Push 'Timer'.
3) Select the required programming time
4) The display will alternately show the clock
The maximum speed 'H' can only be
Instructions for use
hood by operating the functions shown in
the diagram.
before you start to cook in order to ensure
that a steady air flow has been established
before fumes appear.
minutes after you have finished cooking in
order to expel all the grease from the outlet
duct. This prevents the return of grease,
smoke and smells.
Display
Timer
Decrease selected funtion
Increase selected funtion
Light
Program the working time
required aspiration speed.
from 1 to 99 minutes by using the buttons
'+' and '-'.
and the remaining programming time.
selected manually and will be changed
automatically to the second speed level
after approximately 10 minutes.
.
Tabla de contenido
loading

Tabla de contenido