Bang & Olufsen BeoVision 5 - 42 US Manual página 35

5.12 Service Mode, English
Service counters
Picture adjustments
Home Theatre setup
Miscellaneous
Geometry parameters
TV Tuner service menu
US-Box service menu
ON/OFF (times * 10) shows how many times the TV has been switched off to
stand-by mode. The number is given in full tens. If the number exceeds fi ve digits,
the fi ve last digits are shown (e.g. 123456 is shown as 23456).
The other items in the menu are shown in full days.
See the section of adjustments.
The connections of all units must be completed before setup can be initiated.
Enter the number appropriate for the PROJECTOR and CONTROLLER.
DELAY is the period from Home Theatre mode has been selected to the projector
is turned on.
Press GO to accept the settings, then press EXIT.
Check the function of the projector and controller:
Press LIST (until FORMAT) + 0, to enter Home Theatre mode.
Please refer to the Reference Guide and Users´ Guide for more information
regarding operation.
RESET USER SETTINGS
Activating this menu will reset all user settings to default values and is mostly for
production use.
Therefore be very cautious about activating this menu.
See the section of adjustments.
Only to be used when reparing on component level at BOA.
BOX, MCAD and CCDB are sw versions in the US-Box.
LAST ERRORS
The last ten error codes shall be listed with the most recent error listed at the top.
The error log shall be cleared by pressing GO.
RUNTIME (DAYS):
Shows how many days the US box has been switched on, but as there is no timer
in the US-Box the value may not be quite correct.