EDM Product 33918 Instrucciones De Uso página 15

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
33918
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
3. Fix the rear grill (2) on the plate (P)
screwing the four screws (15).
Make sure that the screw hole
security stay targeted
down.
4. Secure the blades by locking them in
correspondence with the slot of the
rod (16).
Check that the blades can
rotate freely.
5. Tilt adjustment.
The inclination of the fan can be
adjust by loosening the two screws "A"
located on the sides of the connection
the motor. Tighten the screws.
USE OF THE APPLIANCE
Place the unit on a flat and stable surface.
Do not use this fan in an area with high humidity, rich in dust or water.
Connect the power cord to a suitable power outlet (220-240V ~ 50Hz).
ON / OFF switch and fan speed selection (8):
"0": disabled
"1" - low speed
"2" - medium speed
"3" - high speed
The oscillation mechanism is operated by the rotating cam located
under engine:
- Screw in screw "B" in correspondence with the axis of the rotating cam
so that it does not oscillate (Fig. 1).
- Screw in screw "B" in correspondence with the eccentric thread
located on the side of the cam to obtain the oscillation of the fan (Fig. 2).