Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
GENERAL INFORMATION
Dear Customer,
Thank you for purchasing this product.
This document is a simple, quick reference guide to help you access the main functions of the URMET
Domus S.p.A. IP camera Ref. 1093/181M11.
For more information, refer to the instruction manuals on the CD supplied with the product.
INSTALLATION
IMPORTANT NOTE
Make sure that you have the following material (not included) before starting:
lens;
power unit (use of an URMET Domus power unit with the required specifications is
recommended);
cross network cable;
coaxial cable.
1.
Fit the lens on the camera.
2.
Use a CCTV monitor to set the camera (Zoom – Level - Focus). Use the dedicated BNC output for
these operations.
3.
Configure the device network interface connecting the device to the PC by means of a cross cable.
4.
Install the Urmet NVM PLUS client software and configure the device.
5.
Use the IP finder software to identify the IP address of the device and set the basic network interface
configurations (Subnet mask – IP address – Data port).
6.
The device can support up to 6 unicast connections. A video stream can be viewed from up to 6
remote PC connections.
7.
Periodically check the URMET Domus S.p.A. Customer Service Technical Area for firmware
upgrades.
FUTURE DEVELOPMENTS
In the perspective of continuous improvement of the product range and to better respond to the various
needs of an increasingly dynamic and demanding sector, URMET Domus S.p.A. has created this
complementary quick guide to offer you a preview of the most important updates. Urmet Domus reserves
the right to make changes to the style and functions of the product.
This section will be constantly updated to demonstrate our commitment in promoting technology and
innovations.
DS1093-034
All manuals and user guides at all-guides.com
Procedure
3
Tabla de contenido
