Beper P204FER250 Manual De Instrucciones página 9

Dry iron Use instructions
Description of the product Fig. A
1. Power cord
2. Working indicator light
3. Thermostat
Attention: the soleplate is very hot, do not touch during use!
Keep the iron away from children.
Ironing
After preparing all the necessary for the ironing, unroll the power cable and check that it is free from knots or
tangles.
To improve the results of dry ironing, spray water evenly on clothing at least an hour before ironing.
Place the iron vertically, paying attention that the soleplate will not come in contact with objects or anything else.
Insert the plug into the socket.
Set the thermostat to the desired temperature, referring to the symbols printed on the thermostat.
Preheat the iron for 2 minutes before starting ironing.
At this point, you can start ironing.
The iron must be constantly on movement on the fabric to be ironed.
Setting the temperature
Always check the label with the ironing instructions on the article to be ironed and follow them.
Turn the thermostat knob to set the desired temperature, following the legend below.
Symbol Fabric
Do not iron
Synthetics, nylon, acrylic, and polyester cloths
Wool, Silk
Cotton and linen cloths
The number of dots in the thermostat indicates the temperature from the lowest (•) to the highest (•••). The table
is valid for fabrics and not for finishes such as shiny or relief of the fold which must be ironed backwards.
Before using the iron, always make sure that the temperature of the iron is correct with the type of fabric: wool
with wool, cotton with cotton, etc.
The iron is quick to heat up and slow to cool down; so start ironing clothes that require low temperatures (such
as synthetic fabrics) and go in progression with higher and higher temperatures.
When the item to be ironed is made up of several fabrics, adjust the temperature for the most delicate fabric.
If you do not know the type of fabric to be ironed, it is recommended to iron a part of it, normally not visible when
the garment is worn, starting from the minimum temperature, and then finding the most suitable temperature. It
can happen that the garment becomes shining, in this case you need to finish ironing so as not to ruin it and iron
the fabric from the reverse side.
Cleaning of the iron
Unplug the appliance from the socket.
Clean the body of the iron with a damp cloth without detergents.
Do not use metallic sponge or abrasive detergents.
Storage
Disconnect the power cable from the power outlet and let the iron cool down completely.
Wind the cord around the base.
To protect the soleplate, place the iron in vertical position.
9
EN