RiverRidge 06-039 Manual Del Usuario página 9

STEP 8
Place drawing with hole positions on wall in desired position and drill 2 holes.
1.
Insert 2 plastic anchors (L) into holes and attach cabinet in place by inserting 2 long wood screws (M)
2.
through holes on cross bar (5) and tighten into plastic anchors (L) in wall.
STEP 9
1.Insert 4 plastic holders (I) into holes on left side panel (4) and right side panel (3).
2.Make sure shelf holders (I) are at same height.
3.Place adjustable shelf (12) onto shelf holders (I).
4
I
12
3