RiverRidge 06-039 Manual Del Usuario página 8

STEP 6
1.Connect upper back board (9) and middle back board (10) together by sliding into plastic connection strip (N).
2.Attach upper back board (9) and middle back board (10) to cabinet by inserting wood screws (G) through
holes on upper back board (9) and middle back board (10), then tighten to cabinet.
3.Attach lower back board (11) to cabinet by inserting wood screws (G) through holes on lower back board (11) and
tighten to cabinet.
STEP 7
1. Attach left door (1) to left support panel (14) by inserting 6 wood screws (D) through holes on metal
hinges (E) and tighten to left door (1).
2. Repeat above step to assemble right door (2).
3. Adjust hinges to make doors close tight as needed.
9
3
N
10
1
7
9
10
11
D
G
2
90°
G