Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
14. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
15. Technical Specifications
Explanatory notes regarding the specifications on
page 4. Subject to change in accordance with
technical progress.
n
= No-load speed (maximum speed)
P
= Rated input power
1
P
= Power output
2
H
= Max. milling height
max
W
= Max. milling width
max
m
= Weight without mains cable
Measured values determined in conformity with EN
62841.
Machine in protection class II
~
AC power
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a
=Vibration emission value
h, SG
K
=Uncertainty (vibration)
h,SG
Typical A-weighted sound levels:
L
= sound-pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
h
= milling height in steps
1-3
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Electromagnetic disturbances:
In individual cases, the speed may fluctuate
temporarily if the machine is exposed to extreme
external electromagnetic disturbances or the
electronic restart protection may respond. In this
case, switch the machine off and on again.
ENGLISH en
17
Tabla de contenido
