Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Slope mode
3
Do not release the pendulum lock or turn the
transport fastener (2) counter clockwise. Switch
on the lasers (buttons 11, 12). Sloping planes
and tilts can now be measured. The lasers flash
once in a while to show that the device is not
aligning automatically.
Positioning laser lines
4
The top section of the laser unit can be turned on the plinth to align the
lasers approximately. Precise positioning can then be done with the Vernier
adjustment (4). The adjustable feet (7) allow the device to be positioned on
sloping surfaces.
The freely rotatable horizontal circle (3) makes it easy to turn the device to
the required angle. Simply set the scale to zero, then rotate the device to the
angle you want.
14
GB
3
4
