npg NL-2970HHB Manual De Usuario página 23

Setup Menu
OSD Timer
●
Use OSD Timer to adjust OSD duration on the screen: 5sec, 10sec, 15sec, 20sec, 25sec, 30sec or Never
Auto SCART
●
When Auto SCART is set to ON, the input source will automatically turn to SCART if there is signal input by scart jack.
Blue Screen
●
When it is set to ON, the screen will be blue if no signals are available, and this function is not available in DTV mode)
Aspect Ratio
●
Auto; 4:3; 16:9; Full; Zoom1; Zoom2; Panorama
The following options are available: Auto, 4:3, 16:9, Full, Zoom1, Zoom2 and Panorama
All manuals and user guides at all-guides.com
Reset TV Setting
●
This sub-menu allows you to restore all settings to factory default
Auto Installation
●
This setup wizard will guide you through scanning channels and configuring other basic settings.
Software Upgrade
●
You can press ENTER to upgrade software when USB device is connected to TV
Important Unique Button
PROGRAM GUIDE (In DTV Mode)
Press EPG button to display the PROGRAM GUIDE Menu.With this function you could know the detailed information of channels
and the time of programs playing.
It is also possible to check program information for the next eight days,if the information is
available from the broadcasters).
:
Record
Press Green button to start recording of current program.
INFO
: Press INFO button to see the detailed information of the current channel.
Prev Day:
Press Yellow button for program information of previous day
Next Day: Press Blue button for program information of next day
Move:
Use arrow buttons to choose channel or time
TIMESHIFT(In DTV mode)
Press TimeShift button on remote control, and a window will pop up, select OK to start timeshift. The power indicator flickers in red
and green indicating that timeshift is activated , on top right corner of the screen '00:00:00' shows and you can play or pause the
current program. Press STOP button , there will be a prompt on screen asking you if you want to stop Timeshift, select Ok to Exit.