Storage And Transport - Workzone WMW 300-1 Manual Del Usuario

4. Use a soft brush or compressed air to clean the extractor line and the
housing.
5. Wipe the housing off with a damp cloth if heavily soiled.
6. Attach the extractor line to the multifunction tool again.
After every eight hours of operation
1. Unlock the extractor line and remove it.
2. Use commercially-available universal oil to oil the moving parts of the tool
16
holder .
3. Attach the extractor line to the multifunction tool again.

Storage and transport

NOTICE!
Risk of damage!
Improper storage or transport of the multifunction tool could
damage it.
− Store and transport the multifunction tool in a clean, dry
and frost-free location. Always use the enclosed plastic
case to store and transport the multifunction tool and the
accessories. Other storage locations and transport possi-
bilities do not adequately protect the multifunction tool.
• Make sure that the multifunction tool and the accessories are completely dry.
• Fold up the power cable so that it does not knot or kink.
• Place all accessories and especially the washer, the Allen head screw and
the Allen wrench back in the plastic case to prevent the loss of accessory
parts.
AFTER SALES SUPPORT
USA
1 866 326-6446 [email protected]
Storage and transport
USA
17