Finishing Work; Cleaning And Maintenance - Workzone WMW 300-1 Manual Del Usuario

USA

Cleaning and maintenance

6. Hold the multifunction tool up to the work piece.
You can now process the work piece.

Finishing work

1. Take the multifunction tool out of the work piece.
2. Use the On/Off switch
3. Switch the extractor off.
4. Pull the power plug.
Cleaning and maintenance
WARNING!
Burn hazard!
Some tools become hot during operation!
− Always let them cool off completely before cleaning!
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Never submerge the multifunction tool in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Improperly cleaning the multifunction tool and the tools may
lead to damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, hard scrapers and the like.
After every use
1. Before cleaning, pull the power plug out of the socket.
2. Let the tool cool off completely.
3. Unlock the extractor line
(see fig. M).
16
[email protected]
1
to switch the multifunction tool off.
17
and take it off of the multifunction tool
AFTER SALES SUPPORT
1 866 326-6446
USA