Installing A Four-Wire Connection; Important; Installing A Three-Wire Connection; Testing The Operation - Bosch HBL5754UC Instrucciones De Instalación

Hornos individuales, dobles y de funcionamiento combinado integrados
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

12.4 Installing a four-wire connection
IMPORTANT: Use the four-wire cable from home power
1.
supply in the U.S. where local codes do not allow
grounding through neutral, New Branch circuit installa-
tions (1996 NEC), mobile homes and recreational vehi-
cles, new construction and in Canada.
1
2
3
4
Cable from home power supply
1
Black wires
2
Red wires
3
4-wire flexible conduit from oven
4
UL listed or CSA approved junction box
5
White wires
6
UL listed wire connectors
7
Green (or bare) ground wire
8
UL listed or CSA approved conduit connector
9
Connect the red oven wire to the red electrical supply
2.
wire (hot wire).
Connect the black oven wire to the black electrical sup-
3.
ply wire (hot wire).
Connect the white neutral oven wire to the white neutral
4.
(not bare or green ground) electrical supply wire.
Connect the green ground oven wire to the bare or
5.
green ground electrical supply wire.
12.5 Installing a three-wire connection
IMPORTANT: Use the three-wire cable from home
1.
power supply only where local codes permit a three-
wire connection.
1
5
2
6
3
7
4
8
5
9
Cable from home power supply
1
Black wires
2
White wires
3
Green (or bare) ground wire (from oven)
4
4-wire flexible conduit from oven
5
UL listed or CSA approved junction box
6
Red wires
7
UL listed wire connectors
8
UL listed or CSA approved conduit connector
9
Connect the red wire from the oven to the red wire in
2.
the junction box.
Connect the black wire from the oven to the black wire
3.
in the junction box.
Connect both green ground wire and white wire from
4.
the oven to the white, green or bare neutral wire in the
junction box.
13 Testing the operation

Testing the operation

Check if your unit is working properly after you have com-
Testing the operation
pleted the installation steps.
Turn on power at the breaker.
1.
To test the oven select the Bake mode. See the User
2.
Manual for detailed operating instructions.
Verify that the oven light comes on and the oven begins
3.
to preheat.
To test the door lock set the Self Clean mode. Confirm
4.
that the door locks when the lock icon appears in the
display.
Testing the operation en-us
6
7
8
9
23
Tabla de contenido
loading

Tabla de contenido