Uline H-4039 Guia De Inicio Rapido página 2

SEPARATING SPILL CONTAINMENT
WORKSTATIONS BOUND BY CONNECTORS
1. While lifting one workstation slightly off the ground,
gently tap on the top edge of the other attached
workstation with a plastic or rubber mallet.
(See Figure 5)
PAGE 2 OF 6
ASSEMBLY CONTINUED
2. After repeated taps, the workstations should
separate. (See Figure 6)
3. Repeat steps 1 and 2 to detach the other connectors.
Figure 5
1-800-295-5510
uline.com
NOTE: When separating accumulation centers
always remember to remove the grates and
make sure there is no liquid in the sump areas.
Figure 6
0321 IH-4039