Behringer ST1 Guia De Inicio Rapido página 4

32
STAGE TRI LED BUNDLE ST1
Display
Item
Button:
(1) (2) (3) (4)
(5) (6) (7) (8)
LED:
Display Functions
Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired
functions and the display will flash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and
confirm, or press MENU to go back without saving.
The main functions are as follows:
Menu Options and Settings Description
Addr A001-512 UP/Down to select from address 1 to 512
ChAn 1Ch, 2Ch, 3Ch DMX Channel selection 1/2/3/5/8-Mode1/8-Mode2/16 Channel mode
5Ch, 8Ch-1
8Ch-2, 16Ch
MASL MASt Activate MASTER (HOST) mode option
SLAv Activate SLAVE mode: when connected to DMX input, slave unit will replicate the
master (HOST) unit
Auto n- n001-n100 Activate AUTO mode, select among 1-100 repetition times
SPEd SP01-99 Auto mode select SP01 min speed, SP99 max speed
Stro FS00-99 Auto mode select strobe frequency from FS00 = off, FS99=max strobe speed
ProG Pr- Activate SHOW mode. Select PR1-24 to select among 24 preset shows
Pr01 Co- Static color
Co01 Preset color 1 Red
Co02 Preset color 2 Green
Co03 Preset color 3 Blue
Co04 Preset color 4 White
Co05 Preset color 5 Amber
Co06 Preset color 6 Royal purple
Co07 Preset color 7 Orange
Co08 Preset color 8 Aqua green
Co09 Preset color 9 Purple
No. Silkscreen Function
Activates main menu and toggles between
1 MENU menu items. Closes an open submenu
without saving
Decreases the displayed value by one/
2 DOWN
Navigate function
Increases the displayed value
3 UP
by one/ Navigate function
Enter selected function/
4 ENTER
Confirm and save
5 DMX Flashes when in DMX mode
6 MASTER Flashes when in MASTER Mode
7 SLAVE Flashes when in SLAVE Mode
Flashes when in
8 SOUND
Sound Active Mode
Menu Options and Settings Description
Co10 Preset color 10 Gold
Co11 Preset color 11 Cyan
Co12 Preset color 12 Lavender
Co13 Preset color 13 Yellow
Co14 Preset color 14 Sky Blue
Co15 Preset color 15 Magenta
OFF Black out
Stro FS00-99 Select strobe frequency from FS00 = off, FS99=Max strobe speed
Pr02 - 10 PR02-04 Fade show, PR05-07 Fade in-out, PR08-10 JUMP show
Stro FS00-99 Select strobe frequency from FS00 = off, FS99=Max strobe speed
Sped SP01-99 Show mode select SP01 Min speed, SP99 Max speed
Pr11 - 19
Stro FS00-99 Select strobe frequency from FS00 = off, FS99=Max strobe speed
Sped SP01-99 Show mode select SP01 Min speed, SP99 Max speed
FAdE Fd00-Fd99 Show mode select FD00 no fade, FD01 Min fade time, FD99 Max fade time
PR20-PR24
Stro FS00-99 Select strobe frequency from FS00 = off, FS99=Max strobe speed
Sped SP01-99 Show mode select SP01 Min speed, SP99 Max speed
FAdE Fd00-Fd99 Show mode select FD00 no fade, FD01 Min fade time, FD99 Max fade time
Col1 Co01-Co15/OFF Select moving color
Col2 Co01-Co15/OFF Select background color
Manu dIM d000-100 Manual mode select dimmer brightness from 0 = off, 100=Max
r r000-r255 Manual mode select Red LED brightness from 0 = off, 255=Max
G G000-G255 Manual mode select Green LED brightness from 0 = off, 255=Max
b b000-b255 Manual mode select Blue LED brightness from 0 = off, 255=Max
Stro FS00-99 Manual mode select strobe frequency from FS00 = off, FS99=Max strobe speed
SoUn on Turn SOUND CONTROL ON. The AUTO and Show mode will follow the rhythm of the
music
oFF Turn SOUND CONTROL mode OFF
Sens S001-100 Select sound sensitivity of SOUND mode from low to 100 high
bLnD no when DMX signal is interrupted, it will go back to last selected mode
YES when DMX signal is interrupted, it will black out
Led on The led display is always ON
oFF The led display turns off after 25-30 seconds. Touch any key to turn back ON
Disp dISP The led display in forward direction
dSIP The led display rotate 180 degree
tESt tESt Press ENTER to start test mode, light will perform routine test
FhrS Press enter to show fixture run time
vEr Press enter to show software version
33
Quick Start Guide