received, and the timer (n) will read 30 minutes.
2. Set when you would like the delayed heating or sterilisation cycle to begin by acting on the "+"
and "-" buttons/icons (o) until you reach the desired interval. Intervals available: 30 min.; 1 h; 1:30
min.; 2 h.
3. Once you have made your selection, press the on/off touch button (e) to activate the delayed
start: an audible signal will be heard, the timer (n) will show the amount of time remaining until
the cycle begins and the on/off touch button/icon (e) will blink with a white light indicating that
the product is waiting for input. If the delayed start option is not confirmed within 3 minutes, the
device will emit an audible signal and switch off automatically.
4. The end of the countdown for the delayed heating or sterilisation cycle is marked by the timer
(n), which first reads 00 and then shows the time remaining for the completion of the heating or
sterilisation cycle; by the on/off touch button/icon (e), which lights up with a white light indicat-
ing the selected cycle is in progress; and by an audible signal.
5. To interrupt the delayed start feature and initiate the cycle immediately, press the on/off touch
button (e) once more
6. To switch off the bottle warmer press the on/off touch button (e) twice consecutively, until the
interface switches off and an extended audible signal is heard. Unplug the power cable (c) from
the power socket.
TECHNICAL DATA
00007390100000
Mod. 06867_M
220-240V~, 50-60Hz, 220W
Made in China
For the warranty for product defects see the specific provisions of applicable national laws in the
country where purchased, if required. The warranty does not cover components subject to normal
wear and tear.
ARTSANA reserves the right to change information provided in this manual at any time and with-
out notice.
The reproduction, transmission, copying, as well as the translation into another language, of any
part of these instructions, are absolutely forbidden without the previous written authorization by
ARTSANA S.p.A.
EC DECLARATION OF CONFORMITY
Artsana S.p.A hereby declares that this appliance, brand Chicco mod. 06867_M, complies with all
the essential requirements and other provisions set forth by the EU Directives 2014/30/EU (electro-
magnetic compatibility), 2014/35/EU (low voltage directive) and 2011/65/EU (RoHS). A full copy of
the EC declaration can be requested from Artsana S.p.A. Via S. Catelli 1 – 22070 Grandate (CO) Italy.
THIS PRODUCT COMPLIES WITH THE DIRECTIVE 2012/19/EU.
The crossed bin symbol on the appliance indicates that the product, at the end of its life,
must be disposed of separately from domestic waste, either by taking it to a separate waste
disposal site for electric and electronic appliances or by returning it to your dealer when
you buy another similar appliance. The user is responsible for taking the appliance to a special
waste disposal site at the end of its life. If the unwanted appliance is collected correctly as separate
waste, it can be recycled, treated and disposed of ecologically; this avoids a negative impact on
both the environment and health, and contributes towards the recycling of the product's materials.
For further information regarding the waste disposal services available, contact your local waste
disposal agency or the shop where you bought the appliance.
35