Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Note:
The steel side of roller must
be installed against frame.
(Outside Panel)
Smooth Side or
Pattern Side
7. Install the Rollers
NOTE: When installing the outside panel, the smooth side or pattern side of the glass should be on the
side opposite the rollers. When installing the inside panel the smooth side or pattern side of the glass
should be on the same side as the rollers.
NOTE: The steel side of the roller must be installed against the top frame flange.
Use #8-32 x 3/8" panhead screws to attach two rollers on each panel.
On the outside panel, attach the rollers to the top frame flange so they are on the opposite side of
the top flange as the bottom frame holes.
On the inside panel, attach the rollers to the top frame flange so they are on the same side of the
top flange as the bottom frame holes.
1034041-2-A
Top Frame Flange
#8-32 x 3/8"
Panhead Screw
Screw
Roller
Roller
Bottom frame holes always
go toward shower.
10
Screw
(Inside Panel)
Smooth Side or
Pattern Side
Sterling
Tabla de contenido
