Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
12
COMMISSIONING AND OPERATION
Before the first operation
Before using the machine to prepare coffee, run only water (without filter and
coffee) during the first run.
1
Insert the plug into the socket.
Fill the jug with cold water. Pull the water tank cover up and pour the
2
water from the jug into the tank. Replace the water tank cover.
3
Place the jug back in its position.
4
Press the On/Off switch to start the cycle.
Coffee preparation
Fill the water tank. The water level should be below the MAX mark. The
1
scale on the tank and on the jug indicates the number of cups.
Turn the funnel housing to the left, insert a filter and fill it with ground
2
coffee. Use about 6-7 g of medium-fine ground coffee per cup.
3
Turn the funnel housing back into the machine.
4
Make sure that the jug is properly seated.
Switch on the machine. The power indicator will come on to show that
5
the machine is on.
6
After the coffee is ready, turn the machine off and remove the jug.
If the machine is not turned off after making coffee, the machine will
7
automatically turn off after 40 minutes.
Tabla de contenido
