Basic Operation - Lighting Audio LA-1500BT Manual Del Propietário

Operation

Basic Operation:

To turn the unit on/off
When the unit power is Off, it may be switched On by pressing any button except
the OPEN button. When the unit is On, press and hold the POWER button for more
than 0.5 seconds, to switch the power off.
To select function mode
Press the MODE button to change function mode as follows: -->TUNER --> CD (if
equipped)-->SD/MMC (after inserting SD card) -->USB (after inserting USB stick)
--> BT AUDIO --> AUX -->
When there is no media (CD/USB/SD/BT), those modes will be skipped.
To adjust the volume level
Rotate VOL knob left or right to desired volume level.
To mute or resume sound
Press the MUTE button to eliminate or resume sound immediately during playback.
To resume the sound immediately, you can also press SEL button or rotate VOL
knob.
To set sound mode
Press SEL button shortly and repeatedly to select mode of CT (clock time)
VOL(volume), BASS, MID, TRE, BAL(balance) and FAD(fader) in the sequence
and circulation. In each mode, the waiting time is about 5 seconds, and when the
waiting time is over, it will return to the last display mode. After selecting a sound
mode, use volume control to set level of the selected sound mode.
To set menu
Press SEL button and hold for more than 2 seconds to turn on INVOL mode, then
press SEL button shortly and repeatedly to select CLOCK MODE (adjust clock),
BEEP ALL/2ND/OFF, TAVOL, EON ON/OFF, REG ON/OFF, AF ON/OFF, TA ON/
OFF,EQ ON/OFF, LOUD ON/OFF, LOC ON/OFF(in radio mode), STEREO/MONO(in
radio mode), S-WF ON/OFF, AREA(USA/EUR) in radio mode). After selecting a
desired item, use volume control to set.
INVOL mode
This is the initial preset volume the unit will be played at turn on. Rotate VOL
knob left to right for desired level 0-30.
CLOCK (Adjusting Time)
When this mode is selected, rotate VOL knob left or right to adjust time. You will
have to scroll thru the hour setting to change AM/PM value.
CT mode (Clock Time Display)
Pressing the VOL/SEL button will display the time on or off on the unit. When
switching between listening functions, the time will no longer be displayed until
the VOL/SEL button is pressed again. Pressing the CLK on the remote with display
the time temporarily.
BEEP mode
ALL mode: The beep is generated when any key is pressed.
2ND mode: The beep is generated when the first mode option key is pressed.
OFF mode: The beep sound is disabled.
TAVOL mode (RDS only)
The volume level for Traffic Announcements when TA mode is ON. Rotate VOL knob
left to right for desired level 0-30.
EON mode (RDS only)
Enhanced Other Networks. When on, this allows the receiver to monitor other
networks or stations for traffic programmes, and automatically temporarily tune
into that station.
REG mode (RDS only)
This is mainly used in countries where national broadcasters run "region-specific"
All manuals and user guides at all-guides.com
programming. This functionality allows the user to "lock-down" the set to their
current region or let the radio tune into other region-specific programming as they
move into the other region.
AF mode (RDS only)
Alternative Frequencies. When this mode is active, the radio locks onto the best
possible frequency for a station in a particular part of the country.
TA mode (RDS only)
Traffic Announcements. When this feature in ON, the unit will receive traffic
bulletins.
EQ mode
The unit has predefined EQ settings to adjust your levels to compliment the music
being played. (OFF/POP/ROCK/CLASSIC/FLAT) When EQ is set to OFF, user
settings are used.
Loud mode
This feature boosts low frequencies. It is useful at low volumes.
LOC mode (in radio mode)
Two levels of sensitivity for tuner searching, local and distant.
STEREO/MONO mode (in radio mode)
Adjust the unit to play in either STEREO or MONO.
S--WF mode
Activates the Subwoofer output line on the unit.
AREA mode (in radio mode)
Select to USA or EUR depending on what country you are in.
To remove front control panel
Press OPEN button to release front control panel from unit chassis. When front
control panel is removed, the LED indicator on the front flashes.
To reset unit
Before operating the unit for the first time, or after replacing the car
battery or changing the connections; you must reset the unit. To reset the
unit, remove the front control panel, then press RESET button with a pen or paper
clip. This operation will erase clock setting and stored contents.
Radio Operation
To select radio band
Pressing the BAND button briefly and repeatedly to select the desired radio band.
The sequence for the radio bands is as follows:
-->FM1-->FM2-->FM3-->AM1-->AM2-->
To search for a radio station manually or automatically
Press and hold the >>| button to activate MANUAL searching mode.
In MANUAL mode: Press the >>| or |<< button briefly to manual tune up/down
for the desired radio station frequency step by step.
In AUTO mode: Press the >>| or |<< button, to automatically tune up/down for the
radio station frequency. (If in MANUAL mode and without further operation, the
unit will change to AUTO mode a few seconds later.)
To store current station or turn on a preset one
1) Press one of the 6 number buttons and hold for more than 1 second to store
the current station in the preset memory bank of the number button for the current
band. In this way the unit can store 30 preset stations.
2) Press one of the 6 number buttons briefly to turn on the preset station stored in
the preset memory bank of the number button for the current band.
3). To scan for each preset station or auto search for the strongest stations
8
A) When pressing and holding the APS button for more than 1 second, the radio
searches from the lowest frequency and checks the signal strength level until
the 6 strongest stations are found. Then the 6 strongest stations are preset to
the corresponding preset memory numbered bank. The auto-storage operation
is implemented in the each selected band. When the auto-storage operation is
finished, the radio executes Preset scan.
B) When pressing the APS button or A.P button briefly, the radio searches for each
preset station in the current band and holds at that preset station for 5 seconds
while releasing mute, and then searches again.
4. To search for stations with a PTY (PROGRAM TYPE) program (RDS only)
Press and hold MODE on main unit to select one of PTY program mode. Rotate
the Volume knob to scroll the different program types.
NEWS--AFFAIRS--INFORMATION--SPORTS--EDUCATION--DRAMA-
-CULTURE--SCIENCE--VARIED--POP M--ROCK M--EASY M--LIGHT
M--CLASSIC--OTHER M--WEATHER--FINANCIAL--CHILDREN--SOCIAL-
-RELIGION--PHONE IN--TRAVEL--LEISURE--JAZZ--COUNTRY--NATION
M--OLDIES--FOLK M--DOCUMENT--TEST--ALARM
After selecting the desired PTY program, press the |<< or >>| button to search for
the station of the PTY program. If the desired station of the PTY program is not
found during one search cycle, NOT FND will be displayed on the LCD. The unit
will return to the previous normal radio station and the PTY icon will disappear.
AF [ALTERNATIVE FREQUENCIES] mode (RDS only)
When pressed briefly, AF switching mode is selected and the state of AF switching
mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all
the time. The interval of checking time of each AFs depends on the signal strength
of the current station, from a few minutes for strong station to a few seconds for
a weak station. Every time that a new AF is stronger than the current station, it
switches over to that frequency for a very short time, and the NEW FREQUENCY is
displayed for 1-2 seconds. Because the mute time of AF switching or checking time
is very short, it is almost inaudible in case of normal program. During FM mode,
when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save
RDS program.
TA [TRAFFIC ANNOUNCEMENT] mode (RDS only)
When TA mode is on (TA is displayed on LCD), it will begin to seek TA station and
TP will be displayed on LCD.
When traffic announcement is transmitted:
1). If the unit is in SD, USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its
previous mode and volume level when the traffic announcement is over. If volume
is adjusted during traffic announcement, only the traffic announcement volume is
valid.
* When TA mode is on, SEEK, AUTO MEMORY function can be received or saved
only when traffic program identification code has been received.
USB/SD/CD(if equipped) OPERATION:
1. To insert or pull out a CD or SD card or USB stick
When needing to playback CD/SD or USB music, remove front control panel or
open the cover of USB port, insert CD or SD card or USB stick into CD slot or SD
slot or USB port. Then the playing mode will be changed into CD or SD or USB
mode and display CD or SD or USB on LCD (When CD, SD card and USB stick are
both inserted into their slot or socket, the playing mode will be changed into the
mode of the latter one), and then play the first track of CD or SD or USB.
Operation
2. To select next or previous track to play
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track from the beginning of it if the
playing time is more than 2 seconds.
Press the |<< button briefly to play the previous track if the playing time is less
than 2 seconds.
3. To play fast forward or backward
Press and hold >>| or |<< button to play fast forward or backward.
4. To play previous or next 10th track
Press 5/-10 or 6/+10 button to play previous or next 10th track.
5. How to use 1/>||/TOP button
During playback, press 1/>||/TOP button to pause playback. When in pause mode,
press 1/>||/TOP button to play again.
Press and hold 1/>||TOP button to select the first track for playback.
6. To scan tracks
During playback, press INT button briefly to play the first 10 seconds of each track,
press INT button again to cancel INT function and retain playing the track currently
selected.
7. To repeat track(s)
During playback, press RPT button briefly to play the current track repeatedly, and
the LCD will display RPT ONE.
Press and hold the RPT button to play the tracks in the Album repeatedly, and the
LCD will display D-RPT.
Press RPT button again to cancel RPT function, and the LCD will display RPT OFF.
8. To play tracks in random
During playback, press RDM button briefly to play all tracks in random. Press it
again to cancel RDM function.
9. To quickly select a track to play
Press APS or A.P button repeatedly to select TRACK SEARCH, FIRST CHARACTER
SEARCH or DIRECTORY SEARCH mode.
1) In TRACK SEARCH mode , the LCD will display 0...01 and flash the biggest
digit 0 that the USB stick or SD card contains. Then use volume control to enter
a number of the flashing digit from 0 ~ 9. Then press SEL button to confirm the
number and flash next smaller digit 0. With the same means, enter the number of
the other flashing digit. After finishing entering the number of all flashing digits,
press BAND button to play the track of the selected number.
2) In FIRST CHARACTER SEARCH mode, the LCD will display A--, if there are
some file names with the first characters of A , SEARCH will change into the first
file name with first character of A, by the order of A~Z and 0~9; otherwise, it will
change into NO MATCH.
Use volume control to select files first character by the order of A~Z and 0~9. Then
press >>| or |<< button to select one file its first characters as the selected one.
Finally press BAND button to play the selected file.
3) In DIRECTORY SEARCH mode , the LCD will display the root folder (if there is
no root folder, it will find a root folder named D-ROOT). Then use volume control
to select your desired folder and then press BAND button to enter the folder and
play the first track in the folder, and press >>|/|<< button to play your desired
track in the folder.
9