Tabla de contenido
Idiomas disponibles
Idiomas disponibles
APPLICATION
In the example, the use is shown on a dismantled wheel bearing housing, the same work steps also
apply to a mounted wheel bearing housing.
DISASSEMBLING
1
Install the dismantling shells (4)
on the wheel bearing housing
with two screws (9).
2
Insert the bolts (3) into the
mounting plate.
3
During the disassembly, the
bolts press against the
mounting shells (4) through the
wheel stud holes.
4
Attach the thrust piece (7)
sideways to the drive shaft and
lead the spindle (1) with the
attached mounting plate (2)
from the front through the wheel
hub and the thrust piece (7).
5
Pull out the worn out wheel
hub/bearing unit by turning the
spindle (1) and counter holding
the spindle nut (8).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Fig.1
Fig.3
Fig.5
Tel.: 02196 720480
Fax.: 02196 7204820
Fig.2
Fig.4
Fig.6
Fig.7
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
