ReliOn MICRO Manual De Instrucciones Para El Usuario página 53

Step 3:
Remove the cap from the control
solution bottle. While the Apply Blood symbol
is flashing , place a very small drop on
the end of the test strip. The test strip will
draw up the solution and the meter will beep.
DO NOT put control solution on top of
the test strip. The meter will begin to count
down.
Step 4:
In 7 seconds the meter will beep
again and display the control solution result.
Compare the result to the range printed
on the test strip bottle. Make sure the result
is within the acceptable range. If the result
falls within this range, the meter and test strip
are working correctly.
All manuals and user guides at all-guides.com
53