Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Warning: Use of this equipment in life support applications where failure of this equipment can reasonably be
expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is
not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air,
oxygen or nitrous oxide.
Introduction
Front View
1
Handle: Pull to slide the module out; push to slide
the module in.
2
LCD Monitor: After sliding the module out, flip
up the cover to access the LCD monitor, keyboard
and touch pad.
3
Keyboard
Slide Release: Mechanism to lock the drawer when
4
the console is not in use, preventing it from
accidentally sliding open. To slide the console out,
you must first release it by moving this tab
sideways.
5
Rackmounting Brackets: The brackets secure the
chassis to a standard 19-inch rack or rack
enclosure. See the next page for rackmounting
details.
6
2-Button Touchpad: Press the left button to left-
click, press the right button to right-click. Scroll up
and down the screen by running finger up or down
the far right side of the touchpad.
Rear View
1
Console Port Section: The KVM cable kit
(included) to connect the console to your server or
KVM switch plugs in here.
2
Power Socket: The AC power cord plugs in here.
Rackmounting
The B021-000-19 is designed for mounting in a 1U rack
system. The various mounting options are explained in the
sections that follow.
Standard 4-Post Rackmounting
The standard rackmounting brackets that come attached to the
B021-000-19 allow the unit to be installed in standard 1U
racks by a single individual.
1
Slide out the rear mounting brackets from the console and
mount both brackets (separate from the console) to the
inside rear of a standard 1U rack system using user-
supplied screws.
2
Take the console and gently slide it into the two rear-
mounted brackets in the rack and secure the console in
place by inserting user-supplied screws.
2-Post Rackmounting
The B021-000-19 can also be mounted in a 2-post rack using
the optional 2-Post Rackmount Kit (Model: B019-000). The
mounting hardware allows for the console to be opened with
the drawer in any position. The kit provides added stability and
prevents the console frame from twisting. See the B019-000
Owner's Manual for detailed mounting instructions.
All manuals and user guides at all-guides.com
2
2
3
5
6
4
7
Console and LCD Controls: The controls located
here include the console power On/Off button, and the
buttons used to control the position and picture setting
of the LCD display. See "LCD OSD (On-Screen
Display) Configuration," on the next page for details.
2
1
2
1
7
5
1
Tabla de contenido
