Code 3 XCEL Instrucciones De Instalación Y Operación página 4

Standard Features:
3-Level Switch - This switch is used for changing the emergency warning mode. When the 3-Level Switch is switched to the far left posi-
tion, the unit is off. When the 3-Level Switch is in the first position from the left, the level 1 configuration of the lights is turned on. When the
3-Level Switch is in the second position from the left, the level 1 & 2 configuration of lights are turned on. When the 3-Level Switch is in the
third position from the left, the level 1, 2, & 3 configuration of the lights are turned on. Level 1, 2, & 3 activate the LightAlert. These default
settings can be altered using the rear facing dip switches as well as entering programming mode.
WAIL Rotary Knob - This position produces the Wail tone when selected. Operation of this feature is affected by SirenLock, 3-Level Switch,
Park Kill, and Title 13 features. See these sections for details.
YELP Rotary Knob - This position produces the Yelp tone when pressed. Operation of this feature is affected by SirenLock, 3-Level Switch,
Park Kill, and Title 13 features. See these sections for details.
ALT TONE Rotary Knob - This position produces either Hi-Lo or Hyper-Yelp dependent on Dip Switch 12. Operation of this feature is af-
fected by SirenLock, 3-Level Switch, Park Kill, and Title 13 features. See these sections for details.
Radio (RRB) - This position operates Radio ReBroadcast over siren speakers. These inputs are transformer coupled to prevent loading of
the radio. The audio from the radio is rebroadcast over the siren speakers. The siren tones do not operate when this is activated. All other
control functions operate normally. To connect in the signal to be broadcast, simply connect the two signal lines to the RRB and RRB inputs
of the Amplifier (polarity is not an issue). The RRB feature will automatically shutoff to protect from overheating of the XCEL Siren. Note:
RRB volume cannot be adjusted by the Volume knob, Only by the Potentiometer on the rear of amp.
MANUAL Push-Button - In its default configuration, this push-button generates the Manual Wail tone. When pressed, the Manual Wail
tone will ramp up to the maximum tone and hold. It will hold as long as the MANUAL push-button is held. When the MANUAL push-button
is released, the tone will ramp down and return to the previous function. This button can work the Hit-N-Go mode as well. Operation of this
feature is affected by SirenLock, 3-Level Switch, Park Kill, and Title 13 features. See these sections for details.
AIR HORN Push-Button - In its default configuration, the AIR HORN push-button produces the Air Horn tone as long as it is pressed. It will
override all other siren tones. The AIR HORN push-button will work with Park Kill and SirenLock. Operation of this feature is affected by Title
13 features.
Auxiliary A-F Push-Buttons - As configured through the programming mode, six on/off Auxiliary push-buttons are readily accessible for con-
trolling the Auxiliary outputs of the Amplifier. Each Auxiliary push-button can be custom labeled with the supplied label kit. Each push-button
is backlighted when activated to alert the operator. The default setting is for each Auxiliary push-button to control the corresponding Auxiliary
output of the Amplifier. Auxiliary A through F supplies power to the load through the connector pins labeled A thru F.
Hands-Free - The Hands-Free mode is directly linked to Auxiliary push-button E. By default, the Hands-Free mode is disabled. When Dip
Switch 3 is Up (ON), the Auxiliary Push-Button E is then configured for Hands-Free. If Auxiliary Push-Button E is active, then Hands-Free
mode is active, but waiting for an initial press of the horn ring to activate the WAIL. A second press of the horn ring will activate the YELP.
Pressing the horn ring a third time will activate the ALT TONE. A fourth press of the horn ring will return to the WAIL. This type of scrolling will
continue until the user deactivates the Hands-Free Scroll. Pressing the Auxiliary E turns off the tone and deactivates the Hands-Free Scroll.
Pressing and holding the horn ring will turn off the tone, but leave Hands-Free in the active mode.
Hands-Free Level 3 Lighting - The Hands-Free mode has the option of working directly with Level 3 lighting. If Dip Switch 2 is Up (ON),
the above Hands Free feature will also turn on Level 3 lighting. To activate and de-activate this feature, follow the above instructions under
Hands-Free.
Horn Ring - The XCEL Siren accepts either a positive or a ground signal into the Horn Ring input, this is defined in Programming Mode. The
Horn Ring signal is disconnected from the vehicle and connected to the Horn Ring input. The Horn Relay wire is then run from the Amplifier
to the horn of the vehicle. This allows the Horn Ring to execute some of the user selectable functions of the XCEL Siren. The Horn Ring can
be configured to multiple functions in the Siren Active and Siren Inactive modes of operation. The Horn Ring is set to Scroll in the Hands-Free
mode and cannot be changed.
Horn Ring Transfer - The Horn Ring Transfer allows the Horn Ring to be disabled from the vehicle horn and the controls transferred to con-
trol other siren tones. The Horn Ring Transfer can be set to occur at Level 2 or Level 3.
Page 4 of 10