Alarm Set - Technoline WS 7037 Instrucciones De Funcionamiento

4. Press "TIME/DATE" key to confirm the setting.
5. Press "UP" key one time, the setting will go forward one step; hold the key for 2 seconds, it will run forward by 8
steps/second.
The system will exit automatically if no key is operated in 20 seconds. And the previous setting will be
6.
confirmed automatically

3.3 Alarm set

1. Hold "ALARM" key for 2 seconds to enter into alarm setting
2. The setting item will flash 1 HZ
3. The sequence of alarm setting: Hour  Minute  exit
4. Press "UP" key one time, the setting will go forward for one step; hold the key for 2 seconds, it will run forward by 8
steps/second.
5. Press "ALARM" key to confirm the setting
6. At alarm mode, press "UP" key to on/off the alarm mark
When the alarm is ringing, press "SNOOZE" key enter into snooze state, and ring again 5 minute later
7.
3.4 Ice point alert
In time mode,hold C/F button for 2 seconds to open/close outdoor freezen alert ,when the function is opened,and
temperature is under -1
IV. Power-On and reset
1. When Power-On and reset, LCD full display for 3 seconds  two "BI" and check temperatureenter into the standard
mode.
2. Alarm defaults AM 7:00.
3. Temperature scales defaults Celsius degree ℃.
4. Time system defaults Jan,1
4.1 The function of alarm
1. The BUZZER will ring for 2 minutes as below:
0 – 10 sec.: one "BI" per second;10-20 sec:"BI BI"two times per second,30-120 sec:"BI BI"continually..
2. When the alarm is ringing, press "SNOOZE" key enter into snooze state, and ring again 5 minute later, pr
to exit.
.
℃ ℃, it will last sounding alarm for 30 seconds,and the symbol will flash.
-4
st
,2010 year,00:00:00,24hrs.
the
ess other key