Important Safety Measures; Important Notice - PALSON Arizona Modo De Empleo

GB
Our products have been developed to achieve the highest standards in quality,
functionality and design. We hope you enjoy your new ARIZONA griddle plate from
PALSON.

IMPORTANT SAFETY MEASURES

When using electrical appliances, certain basic safety precautions should be observed,
including the measures outlined below, in order to reduce the risk of personal injury or
material damage.
1. Read all the instructions.
2. Do not touch hot surfaces. Use the handles.
3. To protect against electric shocks, do not immerse the thermostat, cable or plug in
water or any other liquid.
4. Careful supervision is required when the appliance is used by children or in their
presence.
5. Unplug the appliance from the mains power when it is not in use and before cleaning
it. Leave it to cool down before attaching or removing parts, and before cleaning
it.
6. Do not use an appliance if the cable or plug is damaged, if it is not working correctly
or if it becomes damaged in any way. Do not use this griddle plate if the feet and/or
cool edges begin to crumble or become damaged.
7. The use of accessories not recommended by the appliance manufacturer can cause
injury.
8. Do not use outdoors.
9. Do not leave the cable hanging over the edge of a table or counter or allow it to
come into contact with hot surfaces.
10. Do not place the griddle on or close to hot oil, an electric hob ring or hot oven.
11. This appliance should not be moved if it contains hot oil or other hot liquids.
12. Always connect the temperature gauge to the appliance before plugging the cable
into the mains power. To disconnect, first switch off the temperature gauge and then
unplug the griddle.
13. The appliance must only be used for its intended purpose.
14. This product should not be used by children or other people without supervision if
their physical, sensory or mental state prevents them from using it safely. Children
must be supervised to make sure they do not play with this product.
15. If the power cable is damaged it must be replaced by the manufacturer, its authorised
technical service, or a qualified technician to avoid danger.
KEEP THESE INSTRUCTIONS
This product is designed for domestic use only.
8
All manuals and user guides at all-guides.com
Important information about the cable
Only plug the power cable into an earthed socket. As a safety measure, this appliance
is fitted with a polarised plug. This plug will only fit into an earthed socket and only in
one direction. If the plug does not fit completely into the socket, change the position.
If it does not fit in either direction, contact an electrician. Do not try to alter this safety
measure.
A short electrical cable is provided (or connector cable) to reduce the risk of getting
caught up or tripping over a longer cable. Extension leads may be used if due care is
taken.
If using an extension lead, the nominal electrical capacity of this cable must be at least
equal to the nominal electrical capacity indicated on the appliance. The extension lead
must be positioned so that it does not hang off a counter or a table where a child could
pull on it or trip over it.
USER INSTRUCTIONS
Before using the griddle for the first time, familiarise yourself with its characteristics.
Wash the griddle with warm soapy water, rinse and dry. Do not immerse the temperature
gauge or allow it to come into contact with any liquids. Lubricate the non-stick cooking
surface by rubbing in a little cooking oil. Remove any excess oil with kitchen paper.
1. When you remove the griddle from its packaging, the feet will be folded away into
the base in their storage position. Before using the griddle, these feet must be
opened out into the position shown in Fig. 1. To open out the feet, lift the griddle
holding the base at both ends; then reach under the griddle and pull the feet out
until they are correctly positioned. Place the griddle on a dry, flat and heat resistant
surface.
2. Slide the drip tray into place. Insert the temperature gauge into the griddle so the
two prongs of the electric griddle are fully inserted into the gauge. Plug the cable
into the mains power.
3. Turn the temperature gauge to the desired temperature. Pre-heat the griddle. The
pilot light will go out when the pre-selected temperature has been reached (this will
take approximately between 5 and 10 minutes).
IMPORTANT NOTICE: Do not turn the appliance to maximum temperature when
empty, as it may overheat and break down
4. Prepare the food you wish to cook. Since the griddle surface has a non-stick finish,
food can be prepared with little or no oil.
5. Place the food on the griddle and cook according to the cooking time-temperature
table. Adjust the temperature according to personal taste and the specific food item
you are cooking. During cooking, the pilot light will come on and go off indicating
that the desired temperature is being maintained.
9