Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Light/Child lock setting
Short press the "Light/Child lock"
button to adjust the brightness of the
indicators, which cycles through Bright, Dim, and Off.
Press and hold the "Light/Child lock"
button for 4 seconds to enable the
child lock function. Press and hold the button again for 4 seconds to disable
the function.
Remote control pairing
While the heater is running, simultaneously press and hold the "Oscillation on/
off"
and "Child lock"
buttons on the remote control for 4 seconds, the
remote control indicator will blink. Within 30 seconds, simultaneously press
and hold the "Oscillation on/off"
and "Light/Child lock"
buttons on the
heater for 4 seconds. All indicators will light up and there will be a 1-second
beep, indicating that pairing is successful.
Tip: The remote control is already paired during manufacture and can be
readily used.
13
Tabla de contenido
