before riding the product, the user shall check and examine tire performance, battery level, and all functional parts. If
abnormality, discoloration or change of color of material (especially in an area that receives high stress when the product
is in motion or junction), scratch, crack, loose fasteners, and/or missing parts (such as screw, bolts and/or nut) which
strongly indicates that it is not safe to ride the product.
5. Since it is impossible to predict and/or anticipate all and every scenario, condition, and/or circumstances under which a
product user may be exposed to risk and danger, the User Manual is not intended to be an exhaustive list on how to ride
the product safely and/or avoid hazards related to the product. So, in addition, to adhere to the instructions, the user
shall also ride and/or use the product with responsibility, carefulness, precaution, and best judgment.
6. The users shall check and obey the local laws or regulations over the product. The laws and regulations may be different
in different jurisdictions. Apart from the others, such laws and regulations may include:
a.A helmet may be legally required by local law or regulation in your jurisdiction.
b.Your product is not be allowed to be driven on a motorway or highway.
c.You may obtain more information related to legal requirements on the product from your local government.
7. The users shall immediately check whether the product and its accessories are in good condition upon receipt of the
product.
8. All the separate components and parts of the products must be properly installed per the User Manual. Inappropriate
installation and/or assembly may significantly increase the risk of loss of control, product failure, collisions, and falls. The
product may contain removable components and small parts. Please keep them out of the reach of children to avoid
choking hazards.
9. Do not dispose of this product in a landfill, by incineration, or by mixing with household trash. Serious danger/ injury can
occur because of the electrical components and the battery. For information about battery and electrical waste, please
contact your household waste disposal service, your local or regional waste management office, or your point-of-sale.
The user shall not use any non-original accessories or dismantle or modify the product without authorization. All
damages, injuries, and damages to property arising from that place will be your sole responsibility and risk.
10. Segway parties reserve the right to make changes to the product, release firmware updates, and update this manual at
any time. Segway parties may make improvements and changes to this user manual necessitated by typographical
errors, inaccuracies of current information, or modifications to programs and/or equipment at any time and without
notice. Such changes will, however, be incorporated into new editions of this user manual. All illustrations are for
illustration purposes only and may not accurately depict the actual device. Actual product and functions may vary. Due
to the update of the product, there may be some deviations in color, appearance, and other aspects between the
product listed in this manual and the product you purchased. Please refer to the actual product.
11. This document should be considered as a permanent part of the product, and it shall be provided to the user together
with the product all the time.
Thank you again for choosing Ninebot eKickScooter!
15
11. Contact
Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your scooter.
Americas:
Segway Inc.P.O. BOX 3925
Alhambra, CA, 91803, USA
Toll Free: 1-888-523-5583
Fax: 1-603-222-6002
Website: www.segway.com
Have your scooter serial number on hand when contacting Segway.
You can find the serial number on the underside of your scooter.
Appendix: Disassembly or Folding
How to disassemble ZING C8, ZING C10
1
Loosen the quick-release clamp.
2
Press the quick-release button.
Lift the stem up to detach it from the front fork.
3
16