Assembly / Function Overview - JAROLIFT TDRR02W Instrucciones Originales

ontage of the radio receiver
Observe the connection diagram on page 6.
• The mains connection of the radio receiver and all work on electrical installations may only be carried out by an authorised
electrician in accordance with the connection diagrams in this manual. by an authorised electrician in accordance with the
connection diagrams in this manual.
• Carry out all assembly and connection work in a de-energised state.
1. Push the power pack out of the inner support frame and the outer
frame. To do this, hold the outer frame firmly at the side and press
against the power supply unit from behind.
2. First fix the support frame in a suitable flush-mounted box. flush-
mounted box.
3. Installieren Sie die Anschlüsse gemäß dem Anschlussplan in dieser
Anleitung.
When connecting, make sure that the power supply unit is already
must already be on the outer frame before connecting it! must be!
4. After the connection has been made, press the receiver module
(power supply unit), including the outer frame, into the previously
installed support frame.
function overview
With the TDRR01W radio receiver button, you can turn a simple tubular motor into a convenient radio motor in no time at all.
The motor can then be operated remotely via all available Jarolift TDR radio transmitters.
In addition, the radio push-button offers a local operating option via the three large front keys (UP/STOP/DOWN).
The red LED control light on the front of the unit signals the following states:
• lights up permanently: (the unit is ready for operation)
• (permanent lighting = orientation aid e.g. in the dark)
• flashes: (a move command is being processed)
• does not light up: (unit is in learning mode)
Please note!
When the end point of the tube motor has been reached, the LED continues to flash for about 4 min. as the receiver is still in
self-holding. is still in the self-holding mode. Afterwards, the receiver automatically switches back to the ready-to-operate
mode.
LED-Control lamp
Down
Stop
Up
Illustration exemplary
Up
Stop
Down
ASSEMBLY
15