JAROLIFT TDRC08 Instrucciones Originales página 18

PROGRAMMING
Add / copy handheld transmitter - TDRC01
The example shown is exemplary and depends on the respective receiver type. Please refer to the instructions of the receiver!
NOTE:
The TDEF radio motors and the external TDR receivers can be operated with several hand-held and wall-mounted transmitters.
can be controlled. This enables e.g. individual control of the motor with a TDRC01 as well as
Simultaneous group and time control with another hand-held or wall-mounted transmitter with
Timer function (e.g. TDRCT04).
For details, please refer to the respective instructions for the TDEF radio motors and TDR radio receivers.
To teach-in additional hand-held or wall transmitters to a radio motor or radio receiver, you need a hand-held or wall transmit-
ter that has already been taught-in (see "Initial programming").
Programming example - Adding a TDRC08 / TDRC16
1. On a handheld transmitter that has already been taught-in, select the desired channel to be copied using the K1 or K3 but-
tons (for a description, see page 5) (the active channel is marked by a frame in the lower channel bar).
2. On the transmitter that has already been taught in, press the UP and DOWN button simultaneously.
3. Then press - also on the already taught-in transmitter - 8x the STOP-Key.
4. The motor will vibrate briefly to confirm.
5. Press within 10 seconds at the new transmitter to be taught in Press the UP and DOWN buttons simultaneously.
6. Then briefly press the STOP button on the transmitter to be retrained.
The motor will vibrate again briefly to confirm. The code is copied to the new transmitter (channel).
Transmitter already taught-in:
Already taught
Channel (1-8
or 1-16) via
channel select
button Select.
New transmitter to be taught:
Desired channel
(1-8
or 1-16)
Select via the
channel selection
button.
If you want to control more receivers with this transmitter/channel, repeat the procedure.
18
Up/down button
simultaneously
press.
Press the up/
down button
press.
max. 10 sec.
8 x Stop button
press.
max. 10 sec.
Stop button
press.
max. 10 sec.
max. 10 sec.
(engine vibrates)
(engine vibrates)