Idiomas disponibles
Idiomas disponibles
Assembly Instructions
STEP 3
Only assemble one side leg using 6 pcs
screw "C".
STEP 5
Move the black mark to the center position,
then tighten the screw "G".
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to make sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packaging straps before you start to assemble.
• Do not tighten all screws/bolts until pieces are completely assembled.
• Keep all hardware parts out of children's reach.
• It is recommended for 2 persons to complete this assembly.
All manuals and user guides at all-guides.com
Suggest to keep the
distance of 5mm from metal
edge to panel edge.
mark
distance
Top Panel 59605/16202/16200/16201/59607/16199/34405/16198
Side Leg Frame-Full Length 16204/16205
Side Leg Frame-Short Length 16206/16207
High Table Side Leg Frame 16209
STEP 4
If the other leg does'nt align the edge of
the top panel,usually need one man make
this leg at the correct position,another man
tighten 6 pcs screw "C".
TWO PEOPLE ARE REQUIRED TO
ASSEMBLE AND MOVE THIS MODEL
STEP 6
Adjustable Cross Bar Set 16208
Suggest to keep the
distance of 5mm from metal
edge to panel edge.
Rubber hammer
