Timer Mode - Hiyasu ASE1297T12i Manual De Funcionamiento

Manual 06-05ENG 6/5/05 17:27

Timer mode

PRECAUTIONS
●
When you select the operating mode, the remote control will automatically transmit the sig-
nal from the programmer to the interior unit at the right time. Therefore, the remote con-
trol should be located in a place from which it can transmit the signal correctly to the inte-
rior unit.
●
The effective operating time which can be set with the remote control is limited to 24 hours.
Página 85
MODES
1. Timer on/off button
Press the TIMER ON or OFF button as required.
●
The current timer programming will appear on the
screen, together with the TIMER ON/OFF indicator and
the two dots in the timer will be flashing.
2. TIME ADJUST button
●
Press this button to set the time required.
▲ Forwards.
▼ Backwards.
Every time you press this button, the time will go
forwards or backwards 10 minutes, depending on
the button pressed. The time will change at the
speed with which you press the button.
3. OK button
Press this button.Check that the TIMER pilot on the
viewer panel on the interior unit is lit up.
Cancel
4. Button for cancelling (CANCEL) to cancel the timer
programming, press the CANCEL button.
Modify
Follow steps 1, 2 and 3 to modify the programming.
85