Attaching The Fan Blades - Turn of the century Novella Manual Del Propietário

6.
Attaching the
Fan Blades
NOTE: Your fan blades are reversible. Se-
lect the blade finish which best accentuates
you decor.
1. Attach blade to blade bracket using the
screws provided as shown in figure 9.
Insert a screw into the bracket. Repeat
for the two remaining screws.
2. Tighten each screw securely.
3. Fasten the blade assembly to the motor
using the screws supplied (Figure 10).
4. Repeat steps 1-3 for the remaining
blades.
Fiber Washer
Mounting
Screw
Fan
Blade
All manuals and user guides at all-guides.com
Attaching the
Light Kit
1. Remove the three mounting screws on
the switch cap of the light kit below the
motor.
2. Connect the wires exiting the bottom of
the motor with the light kit by connecting
the motor with the wires from the light
Blade
kit.
Bracket
3. Slide the light kit up and secure it to the
switch cup using the three screws that
were removed in step 1.
4. Insert the glass shade into the glass
holder by carefully squeezing the steel
tensioners on the light fixture socket to-
Figure 9
gether.
5. Gently slide the glass shade over the
steel tensioners. Make sure the glass
shade is fully inserted into the socket for
a secure fit. Repeat for the remaining
glass shades.
Rubber Pad
6. With the power off, insert the light bulbs
(included) into the light kit sockets. Max
40 watts medium base bulbs.
To remove the glass shades, gently slide the
shade partially from the socket and squeeze
the exposed steel tensioners. Remove the
shade and release the tensioners.
Figure 10