SAFETY INSTRUCTIONS FOR CORDLESS TOOLS
This lamp uses a rechargeable lithium battery which, if used improperly, can burst, ignite and cause injury.
Observe the following safety rules
• Do not expose the product to fire or high temperatures.
• Do not change or modify the product.
• Do not puncture or damage the product in any way.
• Do not immerse the product in water.
• Do not try to change the battery. The battery may only be changed by qualified persons.
• Do not apply excessive pressure to the product.
• Failure to observe the aforementioned information can lead to personal injury or property damage.
PERSONAL SECURITY
• Stay alert, watch what you are doing, and use common sense when operating any power tool. Do
not use a power tool when you are tired or under the influence of drugs, alcohol, or medication. A
moment of inattentiveness while operating a power tool can result in serious injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a
dust mask, non-slip safety shoes, a hard hat or hearing protection, which are used under suitable
conditions, reduce risk of personal injury.
• Prevent unintentional starting. Make sure the switch of product is off. Carrying power tools with your
finger on the switch can lead to accidents.
• Always keep a firm footing and balance. This allows better control of the power tool in unexpected
situations.
• Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose
clothing, jewelry, or long hair can get caught in moving parts.
SCOPE OF DELIVERY
1 Cordless screw driver
1 USB-Charging cable, length 1 meter
13 Sockets, 6.3 mm (1/4") Drive, 6-point,
Sizes: 4 / 4.5 / 5 / 5.5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14 mm
3 Bits, 6.3 mm (1/4") Drive, Internal Hexagon: H3 / H4 / H5
4 Bits, 6.3 mm (1/4") Drive, Internal Square: S0 / S1 / S2 / S3
4 Bits, 6.3 mm (1/4") Drive, Slot: SL3 / SL4 / SL5 / SL6
4 Bits, 6.3 mm (1/4") Drive, Cross Slot: PH0 / PH1 / PH2 / PH3
1 Bit, 6.3 mm (1/4") Drive, Cross Slot: PH1 x length 50 mm
3 Bits, 6.3 mm (1/4") Drive, Cross Slot: PZ0 / PZ1 / PZ2
6 Bits, 6.3 mm (1/4") Drive, T-Profile (for Torx): T15 / T20 / T25 / T30 / T35 / T40
1 Bit Adapter, 6.3 mm (1/4") Drive – Outer Square 6.3 mm (1/4"), length 30 mm
1 Automatic Bitholder, Internal Hexagon 6.3 mm (1/4"), length 80 mm
COMPONENTS
1 Bit
2 Internal hexagon output,
3 LED Working light
4 Button clockwise
5 Button counter-clockwise
6 Button On-Off / setting Nm
7 Torque indicator
7 Charge level indicator
8 USB Charging socket
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
.
6.3 mm (1/4")
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed