Lenco DAB-11 Manual Del Usuario página 8

Selecting the modes
When the radio is turned on, press the Mode button repeatedly to switch between DAB + and FM
modes.
DAB+ operation
When you first select DAB+ radio, it will search for and store all available DAB+ stations.Once Auto
search is completed, your radio will select the first station tuned. You can also press Scan button for
the same purpose.
Selecting between stations. With your radio on:
Press the Mode button to select DAB+ mode.
Press the Prev or Next button to navigate through the list of stations.
Press Enter/Snooze button to tune to the station currently shown on the display.
You may adjust volume by turning Volume to left or right.
FM operation
With your radio on, press the Mode button to select FM mode.
Press the Prev or Next button to manually tune to specific frequencies by 0.05MHz per step.
The radio also includes the scan feature of FM, allowing you to automatically tune to FM stations.
Press the Scan button to automatically search for the next available radio station. When a station is
found it will be automatically played.
You can search for stations in the opposite direction by pressing and holding the Scan button.
Storing stations as presets
Radio can store 10 stations as presets in both DAB+ and FM mode. To store a preset:
Tune to the station you like, press and hold the Preset button, then using the Prev or Next button to
select desired preset number. Then, press and hold the preset button for 2 seconds, display indicate
Preset Store< xx: (Empty)>, now select with Prev or Next button the desired preset for store.
Press the Enter/Snooze button to store the station.The message "Preset xx stored" will appear on the
display.
8