Preparation And Wall Mounting - oneConcept V355 Manual Del Usuario

PREPARATION AND WALL MOUNTING

Preparing the Remote Control
• irst push to inside as the direction indicated by the arrow (See 1) and
then Remove the battery holder as the direction indicated by the arrow
(See 2).
• Replace the battery Set a new battery property with (+) side up as
illustrated (See 3).
• Insert the battery holder. Push in the holder to the original position
(See 4).
Using the remote control
Hold the remote control towards the unit. Operating angle: Approx. +/- 30°
in any direction. Caution: The lithium battery has a foil to protect it during
transport. Remove it before first use.
Attaching the foot
Turn the unit over and attach the foot to the bottom: First insert the
connectors into the openings provided and then push the foot towards the
front of the unit until it clicks into place (see A). To remove the foot, reverse
the procedure (see B).
A
EN
13