Hama 210566 Instrucciones De Uso página 4

5. Use the magnetic pads to apply/insert
Note – Adhesive surface
• Ensure that the mounting surface to which the adhesive pad is to attach (such as the back of a
mobile phone, GPS navigation system, etc.) is free of dust and grease. Use a suitable cleaning
agent from a specialised dealer to clean the surface.
• We cannot guarantee that residue will not be left on the mounting surface after the adhesive
pad is removed.
• Remove the protective foil from the adhesive side of the round magnetic pad and press it onto the
rear of the mobile phone for a few seconds.
• The rectangular magnetic pad can simply be inserted between the protective cover and the back of
the mobile phone.
• Please note that a thick protective cover may reduce the effectiveness of the magnetic clasp.
• Please note that dust and dirt that gets between the mobile phone and the magnetic pad may
cause scratches.
• Please note that the magnetic pad inside is manufactured out of metal and therefore may impair the
transmitting and receiving
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
5