Hama 210566 Instrucciones De Uso página 3

G Operating Instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these
instructions in a safe place for future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and
risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package contents
• Magnetic holder
• These operating instructions
3. Safety instructions
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• When using this product, observe the applicable local traffic laws and regulations.
• Passengers must always have their seatbelts fastened so that abrupt movements of the vehicle
(braking, steering) or an accident will not cause them to collide with the product and injure
themselves.
• Dispose of packaging material immediately according to locally applicable regulations.
• Do not modify the product in any way. Doing so voids the warranty.
Warning
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility
are not blocked or restricted.
• Do not allow yourself to be distracted by the product, for example when driving a vehicle
or operating sports equipment. Always pay attention to the surrounding traffic and your
environment.
4. Holder installation
Note
• Before mounting the holder, check the installation options in your vehicle. If in doubt, consult the
manual for your vehicle or contact the manufacturer.
• Before setting a device in the holder, check that the panels are sturdy enough to bear the weight.
We recommend against using this model for terminal devices heavier than 300 g.
• Never apply force when using the product or during installation.
• Carefully push the ventilation grille clamp onto the open panels of the ventilation grille until it locks
into place
• To remove the holder, carefully pull it out of the ventilation grille.
4