Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BRAKE FLUID SAFETY INFORMATIONS
Brake fluids are toxic and can lead to serious injury! Avoid all contact with brake fluid.
•
Wear safety goggles to minimize the risk of injury from splashing.
•
•
Wear suitable, protective gloves to minimize the risk of injury caused by skin contact.
In case of skin contact with brake fluid, wash off immediately with water.
•
•
Remove contaminated clothing.
•
Do not carry any rags or anything else that has been in contact with brake fluid in your clothes.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally.
TECHNICAL DATA
Voltage: 220-240V 50/60Hz
Max. Power: 35W
Working Pressure: 0.6-3.0 Bar
Max. Flow Rate: 1.2 L/min
DEPLOYMENT / WORKPLACE
The brake fluid bleeder should be installed on a flat surface. Make sure that the filling hose is not
under any mechanical tension, for example when the vehicle is raised on a hydraulic lift.
With the startup procedure and operation, the area around the brake fluid bleeder becomes its
workplace. Otherwise, there is no fixed workplace for the brake fluid bleeder.
OPERATING COMPONENTS
1 ON/OFF switch
2 Start button
3 Fuse
4 Pressure regulator
5 Pressure gauge
6 Filler hose
7 Suction switch
8 Suction hose
9 Power cord
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Dimension: 285 x 230 x 370 mm
Filling Hose Length: 3.5 m
Container empty protection: Yes
Noise level: 70 dB
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
