FingerTip M70C Manual Del Usuario página 38

Using the Lanyard
A Lanyard is included in the scope of delivery of the MedX5 Pulse Oximeter M70C. You
may attach it to the device by threading the thinner end of the lanyard through the hanging
hole on the left side of the device.
Troubleshooting
Error: SpO and / or pulse frequency values are not displayed resp. are not displayed correctly.
2
Remedying: Place on of your fingers completely into the finger opening ③ on the backside of the device. Use a new battery. Do not move
or speak during the measurement. If still no correct values
can be measured, contact the service centre.
Error: The device cannot be switched on.
Remedying: Remove the old battery and insert a new one. Press the START-button ②. If the device still cannot be switched on, contact the
service centre
38