Scott Living 1023VA-36-201 Instrucciones De Montaje, Cuidado Y Uso página 4

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

VANITY CABINET WITH BASE INSTALLATION INSTRUCTIONS
1. Place Base Top (D) face down onto a scratch
free surface such as a styrofoam sheet that
came in the packaging. Using the included
Allen Wrench (DD) lightly fasten Leg (C) to
Base Top (D) using Long Bolt (AA), Lock
Washer (EE) and Washer (BB). Repeat for
two additional legs (C); DO NOT install the
final leg (C) until the end of step 2. Do not
screw Long Bolts (AA) tight until the end of
step 2.
Hardware Used
Long Bolt
AA
Washer
BB
Allen Wrench
DD
Lock Washer
EE
2. Locate Base Shelf (E) and 4th Leg (C) and
set aside. With the help of another adult,
align the Base Shelf (E) into the notched out
areas of the 3 Legs (C) already installed onto
Base Top (D). Using the included Allen
Wrench (DD) lightly fasten Base Shelf (E) into
the 3 legs (C) using Long Bolt (AA), Lock
Washer (EE) and Washer (BB). Using the
included Allen Wrench (DD) lightly fasten the
final Leg (C) to Base Top (D) and Base Shelf
(E) using Long Bolt (AA), Lock Washer (EE)
and Washer (BB). Once all 4 legs are lightly
fastened, use the included Allen Wrench (DD)
to tighten each of the 8 Long Bolts (AA) until
hand tight. Do Not Over Tighten. Set Base
Assembly aside.
Hardware Used
Long Bolt
AA
Washer
BB
Allen Wrench
DD
Lock Washer
EE
1
C
1
x 3
x 3
x 1
x 3
2
D
x 5
x 5
x 5
4
DD
AA
EE
BB
C
DD
AA
EE
BB
E
C
D
2
C
Tabla de contenido
loading

Este manual también es adecuado para:

0852395

Tabla de contenido