Top Corner Extension; L" Corner Brace; Wood Connector - Twin-Star International 28CM671 Manual De Instrucciones Adjunto

M
L
E-5
All manuals and user guides at all-guides.com
M
L
P
P
"L" Corner
N
Brace
M L
We recommend having an assistant
hold the back corner of the Top
piece during steps 14, 15 and 16.
14. Carefully slide Top Corner Extension
piece into place at rear of Mantel/Top.
Insert Bolt (L) and Washer (M) into the
pre-drilled hole in the center mounting
bracket (from the back). Then use a
wood connector (R), align pre-drilled
the holes in the connector with the
pre-drilled holes in the mounting
Top
blocks. Insert Bolt (L) and Washer
Corner
(M) from the outside into the holes.
Extension
And repeat for the opposite side.
HAND TIGHTEN ONLY.
15. Locate "L" shaped Corner Brace (Q),
insert one Wood dowel (N) into each
of the pre-drilled holes, set part aside.
16. Gently lift back of Corner and line up
dowels in top of "L" Brace with pre-
drilled holes in bottom of Corner. Slide
dowels into holes and secure with Bolt
(L) and Washer (M).
HAND TIGHTEN ONLY.
17. Slide the bottom of the "L" Brace
dowels into place, and attach with Bolt
N
(L) and Washer (M).
HAND TIGHTEN ONLY.
M
L
Now you may tighten down all the bolts
holding the Corner Back assembly. Be
careful not to over tighten.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 28CM671
Made in China
Printed in China
© 2007, Twin-Star International, Inc.