Tabla de contenido
Idiomas disponibles
Idiomas disponibles
G
N
N
ELECTRIC
FIREPLACE INSERT
All manuals and user guides at all-guides.com
MANTEL/TOP
N
M
L
COMPLETED
ASSEMBLY
COMPLETED
UNIT
INSTALL
INSERT
FROM BACK
9.
Insert one Wood Dowel(N) into each of
the pre-drilled holes on the top edges of
the Assembly from step 8. Then locate
Mantel/Top (G) and lay finished side up
on top of completed assembly. From the
inside, attach the Mantel using Bolt (L)
and Washer (M) through the pre-drilled
N
holes in the mounting blocks.
HAND TIGHTEN ONLY.
10. Using Phillips head screwdriver
tighten all Bolts alternating top and
bottom, left and right.
11. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
PLEASE READ ALL "ELECTRIC
FIREPLACE INSERT" INSTRUC-
TIONS PRIOR TO INSTALLING
ELECTRIC INSERT IN YOUR
COMPLETED FIREPLACE MAN-
TEL. INSTALL THE INSERT IN
YOUR FIREPLACE CLOSE TO
ITS FINAL POSITION. MOVE
YOUR COMPLETED UNIT ONLY
SHORT DISTANCES. MOVE
COMPLETED UNIT WITH GREAT
CARE. IT TAKES TWO PEOPLE
TO MOVE COMPLETED UNIT
INTO ITS POSITION.
12. Lift insert carefully into the back of the
unit and center in the insert opening.
Do not drag insert across Base/Hearth
as it may scratch your unit.
13. Install the mounting brackets to hold
insert flush against the inside of the
mantel.
Tabla de contenido
