Important Safety Instructions - Makita DML802 Manual De Instrucciones

Linterna luminiscente
Ocultar thumbs Ver también para DML802:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ENGLISH (Original instructions)
1.
Battery cartridge
2.
Red indicator
SPECIFICATIONS
Model
LED
Standard battery
BL1415 BL1415N BL1430 BL1440 BL1450 BL1815 BL1815N BL1820 BL1830 BL1840 BL1850
cartridge
Voltage
Operating time
4 hours
(Approx.)
L
Dimensions
(with battery)
W
79 mm (3-1/8")
H
99 mm (3-7/8")
Net weight
(with battery)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
6. This battery holder part is not waterproof. Do not use it
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
7. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
8. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
9. Do not short the battery cartridge:
Explanation of general view
3.
Button
4.
Switch
14.4 V
5 hours
9 hours 14 hours 20 hours 6 hours
256 mm
272 mm (10-3/4")
(10-1/8")
79 mm (3-1/8")
99 mm (3-7/8")
0.63 kg
0.82 kg (1.8 lbs)
(1.4 lbs)
5.
Strap hook
6.
Ring
DML802
3.2 W x 1 pc
7 hours 10 hours 13 hours 18 hours 23 hours
256 mm (10-1/8")
79 mm (3-1/8")
116 mm (4-9/16")
0.68 kg (1.5 lbs)
(1)
Do not touch the terminals with any conductive
material.
(2)
Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3)
Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
10. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
11. Be careful not to drop or strike battery.
12. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
CAUTION:
1. When the tool is not in use, always switch off and
remove the battery cartridge from the tool.
2. Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 50 °C
(122 °F).
3. Do not give the tool a shock by dropping, striking, etc.
4. Do not expose the light to eyes continuously. It may
hurt them.
5. Do not cover or clog the lit tool with cloth or carton,
etc. Covering or clogging it may cause a flame.
6. Do not disassemble the charger or battery cartridge;
take it to a qualified serviceman when service or repair
is required. Incorrect reassembly may result in a risk
of electric shock or fire.
7. Use the tools only with specifically designated battery
packs. Use of any other battery packs may create a
risk of injury and fire.
18 V
272 mm (10-3/4")
79 mm (3-1/8")
116 mm (4-9/16")
0.93 kg (2.1 lbs)
3
Tabla de contenido
loading

Tabla de contenido